Skip to main content

Clean and maintain stainless steel door fittings

Just like us, you probably like your stainless steel door fittings to shine beautifully. Stainless steel is a very beautiful and practical material, but it does not take much time to maintain and clean it, but it does require quite some attention. Among other things, fingerprints, stains, scratches, incorrect use of certain cleaning products and possibly even rust can make your stainless steel door fittings look less beautiful. Below you can read what you can do to keep stainless steel door handles beautiful and make it shine again!

Requirements for this job
Tools

  • A soft cleaning cloth

Materials

  • Soapy water with a degreasing and non-abrasive detergent
  • Olive or salad oil
  • Cif, preferably especially for stainless steel
  • Stainless steel cleaning agent

What exactly is stainless steel?
Stainless steel is an alloy (a mixture of different metals) consisting of iron, chrome, nickel and carbon. Contrary to popular belief, stainless steel does not stand for stainless steel but for stainless steel. That does mean that stainless steel can rust! However, it is the case that a protective layer is formed on the surface of stainless steel that keeps rust above the surface and slows down rust formation.

If the protective layer (also known as 'oxide skin') is damaged, it can happen that rust settles under the surface. As long as the protective layer is closed, there can be no reaction with other substances and stainless steel will therefore not rust inside. That is why it is important to prevent this and treat stainless steel with care. Damage to the protective layer can be caused by the use of incorrect chemicals (in cleaning agents, for example) and scratches with sharp objects. The protective layer naturally recovers, but this can be helped with the use of the correct stainless steel cleaners and maintenance products.  Click here to visit  heavy duty drawer slides India.

1. Remove fingerprints
With stainless steel you will have to deal with fingerprints, especially in the beginning when it is still new. However, fingerprints are fairly easy to remove using:

  • A soft cleaning cloth and soapy water with a degreasing and non-abrasive detergent. Do not make the cloth too wet and do not use too much soap. You can brush off the fingerprints in this way.
  • Use a special polish intended for stainless steel. These are available in hardware stores or on the Internet.
  • To get a nice shine you can use a little bit of olive or salad oil to polish it. A few drops is sufficient.

2. Remove stains
In addition to (the common) fingerprints on your stainless steel, other stains can also occur. These are easy to remove with some (for stainless steel) Cif. Use a soft cleaning cloth and no rough materials, such as a scouring sponge or a wire brush! After cleaning, you can also polish the stainless steel with some olive or salad oil to give it a nice shiny appearance.

3. Protect for a long time with a stainless steel Polish
In addition to cleaning afterwards, you can also use protective agents that prevent the formation of stains. In the hardware stores and also on the internet, there are many products that help you prevent stains on your stainless steel door fittings . If you do not know which product you need, let yourself be advised in the store.

Be careful with the following things!
  • Dishwashing detergents . Especially low quality stainless steel can be affected by its use.
  • Salty / Acidic substances . For example, vinegar or lemon juice. The use of this can lead to the appearance of irregularities or stains on the stainless steel.
  • High temperatures . Avoid contact with high temperatures. This can cause streaks on the stainless steel that are difficult to remove.
  • Dishwashing detergents . Especially low quality stainless steel can be affected by its use.
  • Raw cleaning products . Do not use a wire brush or scouring pad! You will get scratches from that.
  • For more information visit  hinges manufacturer in Mumbai.


More information about how to maintain door fittings? Then look for all our articles within our knowledge base . For the best range of door fittings, look at the relevant categories, such as door handles , door knobs or the article of door cameras . Have your questions not been answered completely? Let us know! We are happy to answer all your questions by phone, live chat or in response below.
Labels:

Comments

Post a Comment

Popular posts from this blog

Stainless steel bathroom accessories

  Do you want to finish your bathroom or toilet nice and sleek with chic accessories?  We show you all the options with which you can provide your sanitary ware with a set of bathroom attributes with a beautiful design. In this blog we give you information and inspiration in the field of  stainless steel bathroom accessories  , so that you can make a targeted choice for accessories that perfectly match your taste and wishes. Why choose stainless steel bathroom accessories? Stainless steel is of course modern and sleek because it has a matte finish.  But stainless steel is also functional, and that is not unimportant in a bathroom or toilet.  This material is low-maintenance and particularly suitable for damp rooms. Bathroom accessories chrome A surface that you often see on bathrooms is chrome.  Unlike matte brushed stainless steel, chrome is glossy.  For example, if you have a chrome tap, it is nice to also choose matching shiny accessories, such...
1 comment
Read more

Speedometer head screws vs lag screws what's the difference?

  It is a common question at  Sugatsune : "What is the difference between a counter-head screw and a lag screw?".  Of course, you want to choose the right screw for your new job project.  In this blog we explain the difference. Difference between a counter-head screw and a lag screw? The difference between  counter-head screws  and  lag screws  is immediately  apparent  when you look at the screws.  A counter head screw has a wide counter head of approximately 21 mm with a torx 40 impression.  A lag screw, on the other hand, has a large hex head that must be tightened with a socket, spanner, or ring spanner. Check out our amazing collection of  aluminium door locks and handles   The advantage of screws with a torx impression is that they are easier to mount.  But with a hex head you can apply more force while screwing in.  However, pre-drilling is necessary for both screws.  Pre-drilling ensures that th...
Post a Comment
Read more

The 5 biggest myths surrounding stainless steel

Stainless steel is a widely used material in and around the house.  However, much remains unclear about stainless steel, which sometimes leads to misunderstanding by the end-user.  The biggest myths debunked. 1. Stainless steel does not rust The biggest myth about stainless steel is that stainless steel cannot rust.  Stainless steel is  called  stainless steel  by many people , but the correct term is  stainless steel .  This reinforces the false belief that stainless steel is completely stainless. Stainless steel is an alloy of iron, nickel, chromium, and carbon.  The chrome in the alloy provides a wafer-thin impermeable layer, which protects the underlying metal against aggressive and corrosive external influences, for example, comparable to a paint layer.  This layer is maintained by oxygen from the outside.  If this layer is damaged, it will repair itself.  If a damaged area is closed off from oxygen - for example, due to a...
Post a Comment
Read more